RGB Light Strip

Feature:

1. There is no memory highlight in this bulb. It will end up being the main production line mode and the principal variety after power disappointment recuperation.

2. There are 32 lively light globules with at least 8 showcase modes, five degrees of brilliance change, and five degrees of speed change.

3. Support cunning sound decrease.

4. Voice control worked in mouthpiece that distinguishes heartbeat musicality.

5.Using a USB module or the implicit battery-powered battery as a power source is discretionary.

6. Great ally for games, open air social affairs, home speakers, vehicles, and work areas.

1 x RGB Pickuk Light Strip;  1 x USB Cable; 1 x Base;1 x Transparent Sticker ; 1 x Manual; 

Specification:

Type: D08-RGB material

Material: ABS+ electronic parts

Variety: White/Dark (discretionary)

Style: USB 5V power supply/battery-powered battery (discretionary)

Battery-powered battery: Implicit 250mah battery, can be connected or completely energized.

Chip type: 16-digit ARM 8-pin chip

With Application or Not: without Application

Input voltage: > DC 5V 1A

Recurrence: 50-16KHZDimension: 181*181*16*18.5mm/7.1x7.1x0.63x0.73in

Net weight: 45gFunction: 12 powerful horse racing modes +18 voice control modes.

Description:

1.The music level lamp adopts acrylic one-time molded shell, with 16/32 colorful lamp beads inside, matched with MIC dedicated for music and a 16-bit ARM 8-pin chip processor.  Realize the dynamic expression of music and sound field.

 

2.MODE/SPEED key: press briefly to turn the white to select the mode.  Long press to turn red-select 5 speeds.

 

3.COLOR/BRIGHT key: press white briefly to select color;  Long press to turn green-select level 4 brightness at the same time.

 

4.Press two keys: press blue at the same time-learn the ambient noise spectrum.

 

5.Press and hold COLOR at the same time to enter the gain setting mode.

 

6.Power-on (battery model only): Press the COLOR key after power-off.

 

7.Turn off (battery models only): face down for 3 seconds.

 

 

Tips:

1. Do not access a power supply higher than 5V, so as not to damage the motherboard.  Please use the power supply equipment certified by relevant institutions.

2. Do not immerse in water, or use it under the condition of humidity higher than 90%.

3. Do not use any solvent or liquid except absolute alcohol to wipe the screen.

4. Non-professionals should not disassemble it by themselves.  Product failures caused by non-quality problems are not covered by the warranty.

5. Unplug the power supply when not in use.